Used machine tools

Sellout:
Gleason 463 - In sale.



To subscribe for equipment mailing:
Name:
E-mail:
 

USED EQUIPMENT and USED MACHINE TOOLS


MIKRON A 22/1
MIKRON A 22/1
Model: MIKRON A22/1 gear hobber Price: EURO 3200 Description: Module 0.1 - 1.2 DP 21 - 250 Work capacity:max. diameter 20 мм max. module 0.75 Workpiece length max. 30 мм max. gear wheel width 20 мм Pitch min. 6 max. 400 Milling cutter speeds: min 725 rpm max 6000 rpm axial from 0.10 mm/r tо 15.0 mm/r 50 Hz 3x 380 V Machine weight 600 kg Dimensions: Lengh 800 мм Width 800 мм He.. далее
Gleason 463
Gleason 463
Gleason 463 In sale. Max pitch diameter 863 mm (34''). Max face width 76 mm (3'') with Full set of dressers. Hydraulic chucking. Guards. Coolant CAPACITY: Cone distance (max. 30˚ spiral angle and 12" diameter wheel) - 15"/(381mm) Maximum Pitch Angle, shafts at 90˚ - 71˚ 34' Minimum Pitch Angle, shafts at 90˚ - 5˚ 42' Extreme ratio, shafts at 90˚ - 3 to 1 Maximum Pitch Diameter: (90˚ shafts): spiral angle 0˚, ratio 1 to 1 - 15.5"/(393.7mm) spiral angle 0˚, ratio 3:1 - 23"/(584.2mm) spiral angle 30 ˚, ratio 1:1 - 21"/(533.4mm) spiral angle 30˚, ratio 3:1 - 31.5"/(800.1mm) spiral angle 45˚, ratio 1:1 - 22.5"/(571.5mm) spiral angle 45˚, ratio 3:1 - 34"/(863.6mm) Coarsest Diametral Pitch / Metric Module 2 DP / 12.7 Maximum Face Width 3"/(76.2mm) SPINDLE: Diameter of Taper Hole at Large End 3-29/32" Taper (Per Ft) 39/64" Depth of taper 6"/152mm Diameter of hole through spindle 3-1/16” WHEEL DIAMETER: 5-1/2"(139,7 mm) to 13-1/2" (342,9 mm) (can be exceeded in some cases) WORKHEAD SETTINGS: Max. offset above/below center 4.5" / 114,3 mm Max./ min dist. from machine center to spindle nose 20-1/2 (521 mm) - 3" / (76 mm) Feed Rate (Seconds Per Tooth) 1.9-11.8 Total Capacity of motors 21HP / 15,6 kW Approx. Floor Space 135" x 81" (3429x2057mm) Approx. Machine Height 97" (2464mm) Approx. Machine Net Weight 23,000 lbs. (10,422 kg) NOTES: Suitable For The Grinding Of Spiral Bevels, Zerol Bevels, & Hypoid Gears Up To 34" (864mm) Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face Width & 2 DP (.. далее
6620U
6620U
Milling machine planning type STANKO 6620U Equipped with digital readout =DRO). Year 1982. Table working surface 2000x6300 mm Max workpiece weight 50 000 kg Machine weig.. далее
MODUL FCZF 03
MODUL FCZF 03
CNC MODUL FCZF 03 (analog ZFWZ 03) Gear Hobber Year of Made: 1991 Technical details: The largest diameter of the workpiece at high efficiency: 250 mm The largest diameter of the workpiece at full milling: 315 mm The largest module: - With a special milling head: 8 mm - At frezie shaping of teeth: 14 mm The largest feed axis: 280 mm The largest feed tangential way: 160 mm The largest accounts of the tooth inclination: 45 degrees The smallest number of teeth for milling: - With partial drive at normal exit: 8 Dimensions: - Maximum hob diameter: 160 mm - The maximum length of the cutter 200 mm - Diameter of the mounting surface of the table: 295 mm - Centering table depth: 210 mm H7 Taper: MK 5 Table clamping surface: Min.: 190 mm Max. 470 mm The distance between the cutter and the center of the table: - Min.: 20 mm - Max. 300 mm lorry for steep cone-cone: 45 Cutter speeds, stepless: 50 … .. далее
K8544, HOT FORGING PRESSES VORONEZH 2500 t
K8544, HOT FORGING PRESSES VORONEZH 2500 t
HOT FORGING PRESSES VORONEZH K8544, 2500 t
SMERAL LKM 4000
SMERAL LKM 4000
HOT FORGING PRESSES SMERAL LKM 4000
SCHAUBLIN 130 СNС horizontal Lathe
SCHAUBLIN 130 СNС horizontal Lathe
SCHAUBLIN 130 СNС horizontal Lathe
KB8540 - HOT FORGING PRESS 1000t
KB8540 - HOT FORGING PRESS 1000t
HOT FORGING PRESSES K8540, 1000t

17.09.13
29.03.12

KRAMATORSK Special Drilling Lathe
Model KJ16122F2, max workpiece size DxL 4000x10000 mm
Specs
Workpiece external diameter 1400-4000 mm,
Workpiece internal diameter 1000-3270 mm,
Drilling circle diameter 1300-3270 mm,
Centres height over base plate 2600 mm,
Max workpiece weight in chuck 10 t,
Max workpiece on arbors 55 t,
Max drilling head quill travel:
- axial 230 mm,
- radial 180 mm,
Max drilling depth:
- with axial head 40 mm,
- with radial head 70 mm,
Width of T-slot to be milled 5-50 mm,
Drilling heads spindles max speeds 10000 rpm,
Drilling heads taper Morse 4

IMG_7638

01.03.12

HBM TOS W9A (TOS VARNSDORF)  HORIZONTAL BORING MACHINES   - It Is Sold!

New in 1983

 

26.01.12

MODUL FCZF 03 CNC Gear Hobber - New in 1991 - Two machines 315 mm

TOS OHA 16B Gear Shaper - New in 1991 - Two machines 400\250 mm

STANKO 5A125 NC Gear Shaper   - New in 1991 - Two machines

MIKRON A22/1 gear hobber (max. diam. 20 mm) - Three machines

 

 

26.12.11

→ ERFURT PKZZ 500I.FS Double Point Straight Side press
→ ERFURT PKZZ 500
→ Erfurt PKZZ(III)250.1FS - 250 т. 2500х1250, 1981
→ Erfurt PKZZ(III)250.1FS - 250 т. 2500х1250 1981
→ Erfurt PKnZT 500/2500 - 500 т. 2500х1600 1963
→ Erfurt PKnZT(VI)500 FS - 500 т. 2500х1600 1975
→ ERFURT PKZZ 800х4000 - 800 т. 4000 х 1800 1964
→ ERFURT PKZZ 800х4000 - 800 т. 4000 х 1800 1963