Вы смотрите фотографию с сайта ООО «МАШИНФОРС» -
чтобы вернуться на него перейдите по ссылке machineforce.ru
Gleason 463
Gleason 463 In sale.
Max pitch diameter 863 mm (34''). Max face width 76 mm (3'')
with Full set of dressers. Hydraulic chucking. Guards. Coolant
CAPACITY:
Cone distance (max. 30˚ spiral angle and 12" diameter wheel) - 15"/(381mm)
Maximum Pitch Angle, shafts at 90˚ - 71˚ 34'
Minimum Pitch Angle, shafts at 90˚ - 5˚ 42'
Extreme ratio, shafts at 90˚ - 3 to 1
Maximum Pitch Diameter: (90˚ shafts):
spiral angle 0˚, ratio 1 to 1 - 15.5"/(393.7mm)
spiral angle 0˚, ratio 3:1 - 23"/(584.2mm)
spiral angle 30 ˚, ratio 1:1 - 21"/(533.4mm)
spiral angle 30˚, ratio 3:1 - 31.5"/(800.1mm)
spiral angle 45˚, ratio 1:1 - 22.5"/(571.5mm)
spiral angle 45˚, ratio 3:1 - 34"/(863.6mm)
Coarsest Diametral Pitch / Metric Module 2 DP / 12.7
Maximum Face Width 3"/(76.2mm)
SPINDLE:
Diameter of Taper Hole at Large End 3-29/32"
Taper (Per Ft) 39/64"
Depth of taper 6"/152mm
Diameter of hole through spindle 3-1/16”
WHEEL DIAMETER:
5-1/2"(139,7 mm) to 13-1/2" (342,9 mm) (can be exceeded in some cases)
WORKHEAD SETTINGS:
Max. offset above/below center 4.5" / 114,3 mm
Max./ min dist. from machine center to spindle nose 20-1/2 (521 mm) - 3" / (76 mm)
Feed Rate (Seconds Per Tooth) 1.9-11.8
Total Capacity of motors 21HP / 15,6 kW
Approx. Floor Space 135" x 81" (3429x2057mm)
Approx. Machine Height 97" (2464mm)
Approx. Machine Net Weight 23,000 lbs. (10,422 kg)
NOTES: Suitable For The Grinding Of Spiral Bevels,
Zerol Bevels, & Hypoid Gears Up To 34" (864mm)
Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face
Width & 2 DP (12.5-Module)
© ООО «МАШИНФОРС»